[Aurora-sparc-user] f771: error: invalid option `align-double'

[Stephen Ware]

> Mmm, that might indeed be. You'd best check the cabling and especially the master-slave
> settings of the drives. I've seen this behaviour before and it was caused by faulty jumper
> settings. You should not use cable select, just one master and one slave per IDE bus.
>
> Another possibility is that the OBP does not recognize the drive. Ultra 10 systems officially
> support only 4.2-, 9- and 20 GB drives. Try running .version (including the leading dot) on
> the OBP prompt. If it's not already at 3.31.0, upgrading the firmware might help. If you
> need help with that, let me know.
>
> Yet another possibility is that the drive is dud. Try replacing it.

.version yields:
Release 3.19 Version 4
OBP 3.19.4
POST 3.0.7

There's certainly not 3.31!  I'm not really sure that it's a firmware
problem, since I believe the drive currently in the computer was the
one that came with it... but it would be worth a try anyway.  I'm
willing to try anything.  What do I need to do to upgrade the
firmware?