[Aurora-sparc-user] Sun Netra T1 (105) with Disk
Pack .. possible uses??
Plasma
plasma.m at ukonline.co.uk
Mon Mar 26 14:41:48 EDT 2007
Thought I would take the expert option, and then do a manual partition
setup, but even Expert mode crashes at the same point with the same
exception error on the two machines I tried before, and this is before I get
the option to partition. So I have two machines that I cannot get the
installer to run on. How can I repair the disks so I can re-install them
using the manual partitioning?
While I await a reply I'm going to remove a disk from the other one which
still has Solaris on it and give the installer another whirl on that.
Kevin
-----Original Message-----
From: aurora-sparc-user-bounces at lists.auroralinux.org
[mailto:aurora-sparc-user-bounces at lists.auroralinux.org] On Behalf Of
JMatz at dvfs.com
Sent: 26 March 2007 14:40
To: Aurora user discussion
Subject: RE: [Aurora-sparc-user] Sun Netra T1 (105) with Disk Pack ..
possible uses??
I've seen this with Aurora, multiple disks and LVM. Either take disks out
and add them later or manually partition.
Joel
"Plasma" <plasma.m at ukonline.co.uk>
Sent by: aurora-sparc-user-bounces
03/25/2007 06:43 AM
Please respond to
Aurora user discussion <aurora-sparc-user at lists.auroralinux.org>
To
"'Aurora user discussion'" <aurora-sparc-user at lists.auroralinux.org>
cc
Subject
RE: [Aurora-sparc-user] Sun Netra T1 (105) with Disk Pack .. possible
uses??
Well .. I'm now stuck .. it won't install! Got a little further after 4 of
those CHS errors, I got to take the options for auto partitioning, choose
it
was a server etc then it did this ..
+-------------+ Exception Occurred +-------------+
| |
| An unhandled exception has occurred. This # |
| is most likely a bug. Please copy the # |
| full text of this exception and file a # |
| detailed bug report against anaconda at # |
| http://bugzilla.redhat.com/bugzilla/ # |
| # |
| Traceback (most recent call last): # |
| File "/usr/bin/anaconda", line 1169, in ? # |
| intf.run(id, dispatch, configFileData) # |
| File # |
| "/var/tmp/anaconda-10.1.0.2//usr/lib/anacon # |
| da/text.py", line 507, in run # |
| |
| +----+ +-------+ |
| | OK | | Debug | |
| +----+ +-------+ |
| |
| |
+------------------------------------------------+
Traceback (most recent call last):
File "/usr/bin/anaconda", line 1169, in ?
intf.run(id, dispatch, configFileData)
File "/var/tmp/anaconda-10.1.0.2//usr/lib/anaconda/text.py", line 507,
in
run
dispatch.gotoNext()
File "/var/tmp/anaconda-10.1.0.2//usr/lib/anaconda/dispatch.py", line
171,
in
gotoNext
self.moveStep()
File "/var/tmp/anaconda-10.1.0.2//usr/lib/anaconda/dispatch.py", line
239,
in
moveStep
rc = apply(func, self.bindArgs(args))
File "/var/tmp/anaconda-10.1.0.2//usr/lib/anaconda/packages.py", line
554,
in
turnOnFilesystems
thefsset.createLogicalVolumes(instPath)
File "/var/tmp/anaconda-10.1.0.2//usr/lib/anaconda/fsset.py", line 1432,
in cr
eateLogicalVolumes
entry.device.setupDevice(chroot)
File "/var/tmp/anaconda-10.1.0.2//usr/lib/anaconda/fsset.py", line 2051,
in se
tupDevice
raise SystemError, "lvcreate failed for %s" %(self.name,)
SystemError: lvcreate failed for LogVol00
> /var/tmp/anaconda-10.1.0.2/usr/lib/anaconda/fsset.py(2051)setupDevice()
-> raise SystemError, "lvcreate failed for %s" %(self.name,)
(Pdb)
Now every time I run the installer, I get the 4 CHS errors then
immediately
after ...
+---------+ Exception Occurred +----------+
| |
| An unhandled exception has # |
| occurred. This is most likely a # |
| bug. Please copy the full text of # |
| this exception and file a detailed # |
| bug report against anaconda at # |
+-------| http://bugzilla.redhat.com/bugzilla/ # | ------+
| | # | |
| Search| Traceback (most recent call last): # | |
| | File "/usr/bin/anaconda", line # | |
| | 1169, in ? # | |
| | intf.run(id, dispatch, # | |
+-------| configFileData) # | ------+
| |
| +----+ +-------+ |
| | OK | | Debug | |
| +----+ +-------+ |
| |
| |
+-----------------------------------------+
Gonna try on one of the other 105's I have see if it just this one has
some
faulty hardware in it, but any pointers on it would be great!
Kevin
-----Original Message-----
From: aurora-sparc-user-bounces at lists.auroralinux.org
[mailto:aurora-sparc-user-bounces at lists.auroralinux.org] On Behalf Of Jos
van der Ende
Sent: 25 March 2007 09:58
To: aurora-sparc-user at lists.auroralinux.org
Subject: Re: [Aurora-sparc-user] Sun Netra T1 (105) with Disk Pack ..
possible uses??
On Sun, 25 Mar 2007 10:10:49 +0100
"Plasma" <plasma.m at ukonline.co.uk> wrote:
> Ok .. have swapped the CD Rom for a DVD writer. When I run the text
based
> setup from the Aurora 2.0 DVD .. a few screens in I get a message saying
...
>
> "Warning - the disk CHS geometry (8637,64,32) does not match the
geometry
> stored on the disk label (4924.27.133)"
I've seen it before a couple of times and never noticed any negative
impact. From what I can tell, it seems to be caused by differences in
fdisk versions.
Jos
_______________________________________________
Aurora-sparc-user mailing list
Aurora-sparc-user at lists.auroralinux.org
http://lists.auroralinux.org/mailman/listinfo/aurora-sparc-user
Aurora FAQ: http://www.ecs.soton.ac.uk/~mas01r/aurorafaq.html
__________ NOD32 2143 (20070325) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
_______________________________________________
Aurora-sparc-user mailing list
Aurora-sparc-user at lists.auroralinux.org
http://lists.auroralinux.org/mailman/listinfo/aurora-sparc-user
Aurora FAQ: http://www.ecs.soton.ac.uk/~mas01r/aurorafaq.html
_______________________________________________
Aurora-sparc-user mailing list
Aurora-sparc-user at lists.auroralinux.org
http://lists.auroralinux.org/mailman/listinfo/aurora-sparc-user
Aurora FAQ: http://www.ecs.soton.ac.uk/~mas01r/aurorafaq.html
__________ NOD32 2145 (20070326) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
More information about the Aurora-sparc-user
mailing list