[Aurora-sparc-user] 2.98 nfs install errors on U60

[Plasma]

>     - The installer defaults to enabling IPv6, but then segfaults 
> immediately after  DHCP lease is acquired. Errors on the console 
> indicate "address type 0 not supported by eth0" (or something to that 
> effect; I can get the exact error if it's useful) immediately before the 
> segfault.
>
>     - If I disable IPv6, the NFS path is successfully mounted


I had exactly the same problem with my Netra T1 200 using FTP as the install
method, with IPv6 enabled the installer always crashed while getting DHCP
info or very shortly thereafter.

One other thing I noticed on my T1 200 is that the NIC interfaces are
identified back to front, as in 1 is 0 and 0 is 1. It's not a major issue
but thought I would mention it.

Kevin