[Aurora-sparc-user] Aurora 2.0 install failure on Sun Ultra 10

[Rafal Maszkowski]

On Wed, Sep 06, 2006 at 01:07:45AM -0700, Joseph Simantov wrote:
> I've had exactly the same problem with an ultra5 and
> an ultra30. It is probably caused by CDs burned at a
> speed higher than 4.
> HOwever, even with 4x-burned CDs, the problem may
> appear again. Usually, the machine is convinced to
> read the CD at the 4th or 5th attempt...
> --- Drokare <drokare at awrenscorner.net> wrote:
> > Boot:
> > Allocated 8 Megs of memory at 0x40000000 for kernel
> > Loaded Kernel version 2.6.13
> > Loading initial ramdisk (2522576 bytes at 0x1FC02000
> > phys, ox40C00000
> > virt) ...
> > Illegal Instruction
> > Ok

I cannot deny or confirm the CD speed problem but definitely such kernel
loading problems as above happen with some kernel versions on some UltraSparcs.
I had them on E450 with several official Aurora kernels booted from a hard
disk.

R.
-- 
Jeżeli upadnie cywilizacja zachodnia, to będzie szansa na odbudowę cywilizacji
      chrześcijańskiej. (dr Stanisław Krajski, Radio Maryja, 10 X 2001)